Modern vehicles are equipped with advanced driver-assistance systems (ADAS), including radar, cameras, and ultrasonic sensors that help with features like adaptive cruise control, blind-spot monitoring, and automatic braking. While these technologies enhance safety, they also make refinishing and repainting more complex. If your vehicle requires bodywork or repainting, it’s important to understand how refinishing can impact these sensitive systems.
How Radar and Sensors Work in Your Vehicle
Many newer vehicles use radar and sensors embedded in the bumpers and grilles. These sensors communicate with the vehicle’s computer to detect nearby objects, lane markings, and potential hazards. Even small changes to their positioning or interference from paint and coatings can disrupt their accuracy, leading to malfunctions or reduced effectiveness.
Ways Refinishing Can Affect ADAS and Sensors
1. Paint Thickness and Composition
- Automotive refinishing involves applying layers of primer, basecoat, and clearcoat, which can slightly alter the surface thickness.
- Some radar and LiDAR systems are positioned behind painted bumpers or panels, and excessive paint buildup can interfere with signal transmission.
- Using the wrong type of paint or too much paint can cause signal distortion, affecting the accuracy of radar-based safety features.
2. Sensor Repositioning
- If a bumper, fender, or grille needs to be removed for painting or repair, the sensors may be slightly displaced.
- Even a small misalignment can lead to incorrect readings, causing issues with parking assistance, collision warnings, or lane-keeping systems.
- Proper recalibration is necessary to ensure all sensors function as intended.
3. Clearcoat and Finishing Effects
- The clearcoat layer protects the paint and provides a glossy finish, but it can also impact how signals pass through certain surfaces.
- Inconsistent or excessively thick clearcoat application may reduce the efficiency of radar signals.
4. Calibration After Repairs
- Once the repair is complete, many ADAS features require recalibration to function correctly.
- Vehicles equipped with features like adaptive cruise control and automatic emergency braking need to have their sensors reprogrammed to ensure proper alignment.
- Skipping this step can lead to safety risks, as the vehicle may not respond accurately to surrounding traffic conditions.
How to Ensure Proper Refinishing Without ADAS Interference
Choose an Auto Collision Repair Facility that is Experienced and Equipped in ADAS Calibration
Not all body shops are equipped to handle sensor recalibration. It’s essential to choose a repair center like Eli’s Collision Repair with expertise in modern vehicle systems.
Use Manufacturer-Approved Paints and Coatings
Ensure that the refinishing process follows OEM (Original Equipment Manufacturer) guidelines to prevent signal interference.
Verify Calibration Before Driving
After the repairs are complete, if your vehicle calls for calibrations, we make sure that step is complete before you pick up your car.
Refinishing your vehicle requires more than just a good paint job—it demands precision to ensure that all systems continue to function correctly. In Los Angeles, where stop-and-go traffic makes safety features even more critical, ensuring proper calibration after refinishing is essential. If your vehicle needs bodywork, choose a trusted auto repair center like Eli’s Collision Repair that understands the complexities of ADAS technology to keep your car looking great and performing safely. If you’re interested in learning more about the paint process, check out our blog that goes in more detail.